Risk of injury caused by slipping when inserting blade in the multicutter and byglass splinters when cutting out bonded windows - AS67.00-Z-0001-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
Always interrupt air supply or power supply before inserting or removing blade. Wear protective gloves and safety glasses
MODEL ALL
Risk of injury
When inserting or removing the blade for the multicutter, body parts may be cut if the tightening wrench slips or if the multicutter is switched on unintentionally.
Injuries to eyes and hands may be caused by flying glass splinters when cutting out bonded windows.
Safety instructions/precautions
- Wear protective gloves.
- Wear safety glasses when cutting out window glass.
Pneumatic multicutter:
- Always interrupt air supply when inserting or removing multicutter blade.
Electric multicutter:
- Only clamp in or remove the knife for the multicutter with the power supply plug disconnected.