Remove/install supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116SX
MODEL 221 except CODE (Z07) Top protection
MODEL 216
| Remove/install | |||
| While working on the rear axle care must be taken to ensure that the surface of all aluminum components do not get any scratches, cracks and notches. Otherwise the service life of the parts will be affected | |||
| 1 | Remove spring control arm (6) | AR35.20-P-0114SX | |
| 2 | Remove supporting joint (7a) of wheel carrier (7) | AR35.20-P-0116-01SX | |
| 3 | Install in the reverse order |