Remove/install battery sensor - AR54.10-P-0002SXH

MODEL 221.095/195 

Fig 1: Identifying Battery Sensor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Detach ground line from on-board electrical system battery (G1)		AR54.10-P-0003SX
2	Detach electrical connector from battery sensor (B95)
3	Remove on-board electrical system battery (G1)		AR54.10-P-0009SXH
4	Unscrew nut of ground line on vehicle longitudinal member	Bolt/nut, ground line of battery to body	*BA54.10-P-1028-01C
5	Remove ground line with battery sensor (B95)
6	Install in the reverse order

BATTERY

Number	Designation			MODEL 221
BA54.10-P-1028-01C	Bolt/nut, ground line of battery to body	M8	Nm	16