Remove/install sealing (top) from rear door window frame. - AR72.12-P-1550SX

MODEL 221.0 

MODEL 221.1 except CODE (Z07) Top protection 

Fig 1: Identifying Rear Door Window Frame Sealing Component (Top)

Courtesy of MERCEDES-BENZ USA

	Removing
1	Open front door and rear door (1)
2	Loosen seal (2) from upper and lower window frame (arrows A, B)
3	Pull seal (2) out of trim strip (3)
4	Remove seal (2) from rear door and clean bonding surface on front door (1) edge with eraser disc	Removal disk, Ø 100 mm with fixing shank, 3M Deutschland GmbH D-41453 Neuss Drill
		Cleaner	*BR00.45-Z-1025-04A
	Notes on removing adhesive residues and foils on paint and metal surfaces with surface conditioning disks		AH00.00-P-0013-01AK
	Install
5	Glue seal (2) to front door edge from bottom upward and press on	Do not stretch seal (2) when gluing on, otherwise leakage can occur.
			Figure
6	Coat trim strip (3) with lubricant and install seal (2) in trim strip (3).	Ensure that seal (2) is seated correctly.
		Antifriction agent	*BR00.45-Z-1010-06A
7	Close front door and rear door (1)

Fig 2: Identifying Roller (171 589 06 63 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 l	A 000 989 03 67