Assemble/disassemble door lining in rear door - AR72.12-P-1040SX

MODEL 221.0 

MODEL 221.1 except CODE (Z07) Top protection 

Fig 1: Identifying Rear Door Lining Assemble/Disassemble Components

Courtesy of MERCEDES-BENZ USA

Shown with code (276) Memory in rear, Code (872) Electrically heated left and right rear seats 

	Disassemble/assemble
1	Remove door lining (1) from rear door	Lay door lining (1) front side down on suitable subsurface to prevent damage	AR72.12-P-1010SX
2	Remove armrest (4) from door lining (1)		AR72.12-P-1020SX
3	Remove covering (7)
4	Remove door pocket (5) from door lining (1)		AR72.12-P-1030SX
5	Remove trim strip (2) from door lining (1).		AR72.12-P-1050SX
6	Remove inner door opener (3) from door lining (1)		AR72.12-P-2310SX
7	Remove wiring harness (6) from rear of door lining (1)
8	Assemble in reverse order