220 589 02 31 00 Clamping jaws - WS35.00-P-0175B
MODEL 124, 129, 140, 166, 170, 171, 172, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231
MODIFICATION NOTES
| 23.2.98 | Replacement for 116 589 10 31 00 |
Use in FG 35/Set B
Intended use:
Clamping jaw Ø 34 mm for rear axle shaft, used for pressing on constant-velocity joint