Retrofit Bluetooth Interface Kit - AZ82.70-P-0012M

MODEL 220.### 1#

Installation position

Fig 1: Identifying CP Bluetooth Interface Kit

G10128977

Courtesy of MERCEDES-BENZ USA

	Removing
	Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices	No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.
1	Disconnect battery ground line

	Notes on avoiding damage to electronic components due to electrostatic discharge
	Install
2	Retrofit CP Bluetooth interface kit (6)
	Retrofit Bluetooth interface		AZ82.70-P-0012-01M
3	Connect ground cable to battery

4	Carry out variant coding	After completing variant coding, perform a quick test and delete the fault memory.
	Perform retrofit variant coding		AN82.61-P-0001-05T
	Perform retrofit variant coding	STAR DIAGNOSIS Compact diagnosis system for passenger cars, Order number 6511 1801 00
	Concluding work
5	Carry out start-up and function test	Check telephone operation according to operating instructions.

PARTS ORDERING NOTES

Part no.	Designation	Quantity
B6 787 58 55	CP Interface Kit with Bluetooth	1