Removing and installing fiber optic cable - AR82.70-P-0004ME

MODEL 215, 220 Between control modules right rear seat 

Illustrated on model 220 

Removing fiber optic cable M4 

Fig 1: Identifying Fiber Optic Cable M4 Remove/Install Components - Illustrated On Model 220

Courtesy of MERCEDES-BENZ USA

	Removal, installation
	Notes on fiber optic cables
1.1	Remove rear seat cushion
1.2	Remove rear seat cushion	Model 220 with bucket seats (code 401), right side only
2.1	Remove seat adjustment device	Model 220 with bucket seats (code 401), right side only
3	Remove installation plate from floor
4	Cover fiber optic cable	Do not kink or stretch fiber optic cable D2B  Install caps on fiber optic cable connector and module connection	AR82.95-P-0005-01A
5	Leave fiber optic cable module disconnected		AR82.70-P-0004-01A
6	Install in opposite order
7	Start up and check for proper function