Notes on removing and installing the air conditioner housing - AH83.30-P-0006-01GM
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 209, 463
Illustrated on automatic air conditioner housing
Always remove or install the vehicle's air conditioner housing with the aid of an assistant.
Otherwise damage may occur to the interior and the air conditioner housing.
The seals (11, 10) must be moistened with soapy water; never use oil or grease for this purpose. The guides (12) may only be lightly greased. Ensure that the seal (11) at the air conditioner housing air inlet and the seal (10) at the expansion valve are seated correctly. Replace seals (11, 10) if necessary. Also make sure that the bolt at the firewall is seated correctly in the guides (12).