Information on Tele Aid emergency call system - AH82.95-P-0001-01AM
MODEL 215, 220 with CODE 347 (TELE AID emergency call system (D2B)) with CODE 855 (TELE AID)
TELE AID is an emergency call system in which a telephone link to an emergency call center is established automatically after the system is activated.
Abusive activation of an emergency call is prohibited and may be the subject of a fine.
If the system is activated inadvertently, always wait for the call from the emergency call center and advise the center that the system is activated inadvertently to ensure that no further rescue measures are initiated.
The system is activated automatically if an airbag has been deployed or if a vehicle rollover has been detected.
The system is activated manually using the SOS pushbutton switch in the overhead control panel.
When carrying out repair work on vehicles fitted with TELE AID, always ensure that the ignition key has been withdrawn from the ignition switch.
When carrying out work in the area of the overhead control panel, on wiring harnesses or in the area of the TELE AID for telephone control units, disconnect the battery.
A rollover sensor is installed in the control unit for TELE AID. This control unit must never be moved out of its longitudinal or transverse axis at circuit 15R: ON.
Towing or recovery operations may only be conducted with the ignition key removed on TELE AID vehicles!