LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Body - General Information) >> Body - General Information >> Notes on foam-protected insulation in body - AH60.00-P-0041-01A

Notes on foam-protected insulation in body - AH60.00-P-0041-01A

WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 205 

Foam items in area of sidewall (shown on left side of vehicle) 

IMPORTANT Foam part replacements are inserted using sealant at all the body contact surfaces.

The foam part contact surfaces on the body must be cleaned before insertion.

Fig 1: Identifying Sidewall Foam Area (Shown On Model 205.0)
G10035869Courtesy of MERCEDES-BENZ USA

MODEL 205.0 

Fig 2: Identifying Sidewall Foam Area (Shown On Model 205.2)
G10035870Courtesy of MERCEDES-BENZ USA

MODEL 205.2 

scientia non olet · About LEMON Manuals