Information on processing resin and hardener for fiber composites - AH60.00-P-0029-01SLR
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 199
Processing instructions
- When working with resin (1) and hardener (2), always wear protective gloves (5) and eye protection.
- Always observe manufacturer's specifications regarding storage, mixing and processing.
- Always ensure that the supply container for resin (1) and hardener (2) are not inadvertently mixed up with the other component with tools or by mixing up lids.
- Always work with resin (1) and hardener (2) in well ventilated rooms; use suction or ventilation facilities if required.
- The resin/hardener mixture (6) has a limited processing time. It is therefore absolutely necessary to complete the preparations for gluing or laminating before mixing the resin (1) and hardener (2).
- Adding additional hardener (2) does not result in more rapid curing, but rather only poorer characteristics!
- Mixtures of approx. 50 g or larger should be measured preferably with a digital scale or letter balance. As an alternative, it is possible to use measuring cups (3).