General notes on repair work on vehicles with ADS - AH32.32-P-9406-01A

WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2019 Mercedes-Benz SLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129, 140, 210 with CODE 217 (Level control on rear axle with ADS)

Measures during repair work:

If strong physical shocks could occur during repair work in the area of the acceleration sensors, e.g. due to hammer blows, bodywork etc., remove the affected acceleration sensors first.

Shown on model 140

Fig 1: Identifying Left/Right Front Body Acceleration Sensors (Shown On Model 140)

Courtesy of MERCEDES-BENZ USA

Shown on model 140

Fig 2: Identifying Right Rear Body Acceleration Sensor (Shown On Model 140)

Courtesy of MERCEDES-BENZ USA