General information on assigning balancing shaft to engine - AH03.20-P-1000-01AV

WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 112

Balance shafts in which the balance weights are shaped like this (see picture), can be installed in

112.910

112.911

112.913

112.914

112.915

112.920

112.921

112.922

112.923

the engine.

Fig 1: Identifying Front Correctional Weight, Rear Balance Weight And Balance Shaft

Courtesy of MERCEDES-BENZ USA

Balance shafts in which the balance weights are shaped like this (see picture), can be installed in

112.940

112.941

112.942

112.943

112.944

112.945

112.949

the engine.

Fig 2: Identifying Front Correctional Weight, Rear Balance Weight And Balance Shaft

Courtesy of MERCEDES-BENZ USA