Bearing diagram for crankshaft - AH03.20-P-4351-01GF
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 166, 668
The thrust plates (5) in the bearing cap have a retaining lug each as an anti-twist lock: The oil grooves (arrows) in the thrust washers (3) and (5) must be pointing toward the thrust collars of the crankshaft (1).