Notes on sealant path for timing case cover - AH01.40-P-1000-01TI
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642 in MODEL 211.020/022/084/089/220/222/284/289/620
Sealant path on timing case cover
At the mating points between the oil pan and crankcase, it is particularly important to pay attention to cleanliness and freedom from oil.
Otherwise, oil leaks can occur.
The traced line (A) identifies the sealant run.
Sealing surfaces must be free of oil and grease. Apply sealant to surfaces as a bead 1.5 mm (±0.5 mm) wide. The sealant must be applied within 10 min. The sealant bead must not be spread.
The sealant must be applied in the upper area of the timing case cutout in the center area of the sealing surface since sealant slides downwards due to placement of the timing case cover.
Courtesy of MERCEDES-BENZ USA