Notes on sealant path for oil pan - AH01.45-P-0001-01SY

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 273

Application of sealant to oil pan bottom section for engine with front sump

The line (1) identifies the sealant path.

The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead of height and width 2.0 mm (±0.5 mm). The sealant must be applied within 10 min. The sealant bead must not be spread. Use only the sealant indicated in the repair materials.

Fig 1: Identifying Oil Pan Bottom Section Sealant Applying Area With Front Sump

Courtesy of MERCEDES-BENZ USA

Application of sealant to oil pan bottom section for engine with middle sump

Fig 2: Identifying Oil Pan Bottom Section Sealant Applying Area With Middle Sump

Courtesy of MERCEDES-BENZ USA

Application of sealant to oil pan bottom section for engine with rear sump

Fig 3: Identifying Oil Pan Bottom Section Sealant Applying Area With Rear Sump

Courtesy of MERCEDES-BENZ USA