LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Complete Engine - General Information) >> General Information >> Notes on sealant path for oil pan >> Notes on sealant path for oil pan - AH01.45-P-0001-01MMB

Notes on sealant path for oil pan - AH01.45-P-0001-01MMB

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 152.9, 157, 278 

IMPORTANT The sealant may only be applied to the specified surfaces in the form of a bead with height and width of 2.0 mm (1.0 mm).

The sealing compound must be applied within 10 min.

The sealant bead must not be spread.

IMPORTANT The sealing surfaces must be cleaned.

Use only the sealant indicated in repair materials.

Mount oil pan within 10 minutes after application of the sealant.

Fig 1: Identifying Sealant Applying Area On Oil Pan With Rear Sump
G10037350Courtesy of MERCEDES-BENZ USA

Oil pan with front sump 

Fig 2: Identifying Sealant Applying Area On Oil Pan With Front Sump
G10037351Courtesy of MERCEDES-BENZ USA

Oil pan with middle sump 

Fig 3: Identifying Sealant Applying Area On Oil Pan With Middle Sump
G10037352Courtesy of MERCEDES-BENZ USA

Oil pan with rear sump