LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Complete Engine - General Information) >> General Information >> Notes on sealant path for oil pan >> Notes on sealant path for oil pan - AH01.45-P-0001-01MMA

Notes on sealant path for oil pan - AH01.45-P-0001-01MMA

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 276 

IMPORTANT The sealant may only be applied to the specified surfaces in the form of a bead with height and width of 2.0 mm (1.0 mm).

The sealant must be applied within 10 min.

The sealant bead must not be spread.

IMPORTANT The sealing surfaces must be cleaned.

Use only the sealant indicated in the repair materials.

Mount oil pan within 10 minutes after application of the sealant.

Fig 1: Identifying Oil Pan Sealant Applying Area
G10037347Courtesy of MERCEDES-BENZ USA

Oil pan with front sump 

Fig 2: Identifying Sealant Applying Area On Oil Pan With Front Sump
G10037348Courtesy of MERCEDES-BENZ USA

Oil pan with middle sump 

Fig 3: Identifying Sealant Applying Area On Oil Pan With Middle Sump
G10037349Courtesy of MERCEDES-BENZ USA

Oil pan with rear sump