LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Complete Engine - General Information) >> General Information >> Notes on sealant path for cylinder head cover >> Notes on sealant path for cylinder head cover - AH01.30-P-1000-08SXI

Notes on sealant path for cylinder head cover - AH01.30-P-1000-08SXI

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 207, 212, 218, 221 WITH ENGINE 642 

IMPORTANT The traced line (A) identifies the sealant run.

IMPORTANT Sealing surfaces must be free of oil and grease. Apply sealant to surfaces as a bead 1.5 mm (±0.5 mm) wide. The sealant must be applied within 10 min. The sealant bead must not be spread.

Fig 1: Identifying Cylinder Head Cover Sealant Applying Area
G10037259Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals