Notes on sealant path for cylinder head cover - AH01.30-P-1000-08GY
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642.884/975 in MODEL 461
ENGINE 642.970 in MODEL 463
The lines (A) identify the sealant beads.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead of height and width 1.5 mm (±0.5 mm).
The sealing compound must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealant may be used.