Notes on distribution of sealant on crankcase end cover - AH01.40-P-1000-09MNA
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 177 IN MODEL 205
ENGINE 178 IN MODEL 190
The sealant may only be applied to the specified surfaces in the form of a bead with height and width of 1.0 mm (±0.3 mm).
The sealant must be processed within 10 minutes.
The sealant bead must not be spread.
The sealing surfaces must be cleaned. Use only the sealant indicated in the repair materials.
Mount the end cover within 10 min after application of the sealant.