Notes on application of sealing compound to rear cover at cylinder head - AH01.30-P-1000-03AL
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 640 in MODEL 169
The line (A) identifies the sealant run.
The sealant must be applied along the line (A) in the form of a 1.5 mm ±0.5 mm bead. The sealing compound must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealant may be used.