LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Complete Engine - General Information) >> General Information >> Notes on application of sealing compound to rear cover at cylinder head >> Notes on application of sealing compound to rear cover at cylinder head - AH01.30-P-1000-03A

Notes on application of sealing compound to rear cover at cylinder head - AH01.30-P-1000-03A

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 668.914/940/941/942 

Clean sealing surfaces and apply sealant only to the specified areas in a bead measuring 2.0 mm 0.5 mm. (See illustration below) The sealant must be applied within 10 minutes.

Fig 1: Identifying Sealant Applying Area On Cylinder Head Rear Cover
G10037248Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals