Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06AK
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 266, 640 in MODEL 169.0/3, 245.2
Sealing compound application at end cover
The sealing surface must be cleaned. The sealing compound must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm ±0.5 mm (See illustration below).
The sealant must be applied within 10 minutes. The sealant bead must not be spread. Use only the sealant indicated in repair materials.