Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 112, 113
Sealant application on end cover
The traced lines G, E and the arrow D mark the sealant application.
Clean sealing surfaces, sealant may only be applied to the specified areas in a bead measuring 2.0 mm ±0.5 mm.
The sealant must be applied within 10 minutes.
The silicone bead should not be spread. Only the silicone sealant listed in the repair materials may be used.