Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01R
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 651
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | ENGINE 651 | ||||
|---|---|---|---|---|---|---|
| BA03.30-P-1001-01R | Bolt, belt pulley to crankshaft | Transversal engine installation (Decoupler) | M12X56 | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 90 | ||||
| Longitudinal engine installation (torsional-vibration dampers (TSD)) | M12X56 | Stage 1 | Nm | 80 | ||
| Stage 2 | ∠° | 90 | ||||
| Longitudinal engine installation (Decoupler) | M12X129 | Stage 1 | Nm | 80 | ||
| Stage 2 | ∠° | 90 | ||||
| Stage 3 | ∠° | 90 | ||||
| BA03.30-P-1002-01R | Bolt, flywheel or two-mass - flywheel to crankshaft | Stage 1 | Nm | 45 | ||
| Stage 2 | ∠° | 90 | ||||