Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01M
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 152, 157, 272, 273, 276, 278
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | ENGINE 152 | ENGINE 157 | ||
|---|---|---|---|---|---|
| BA03.30-P-1001-01M | Center bolt, belt pulley to crankshaft | Stage 1 | Nm | 200 | 200 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA03.30-P-1002-01M | Bolt, starter ring gear/drive plate to crankshaft | Stage 1 | Nm | 20 | 20 |
| Stage 2 | Nm | 45 | 45 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| BA03.30-P-1003-01M | Bolt, flywheel or two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA03.30-P-1004-01M | Bolt, starter ring gear/starter-alternator to crankshaft | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| Stage 3 | ∠° | - | - | ||
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | ENGINE 272 | ENGINE 273 | ||
|---|---|---|---|---|---|
| BA03.30-P-1001-01M | Center bolt, belt pulley to crankshaft | Stage 1 | Nm | 200 | 200 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA03.30-P-1002-01M | Bolt, starter ring gear/drive plate to crankshaft | Stage 1 | Nm | 20 | 20 |
| Stage 2 | Nm | 45 | 45 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| BA03.30-P-1003-01M | Bolt, flywheel or two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 90 | 90 | ||
| BA03.30-P-1004-01M | Bolt, starter ring gear/starter-alternator to crankshaft | Stage 1 | Nm | 20 | - |
| Stage 2 | Nm | 45 | - | ||
| Stage 3 | ∠° | 90 | - | ||
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | ENGINE 276 | ENGINE 278 | ||
|---|---|---|---|---|---|
| BA03.30-P-1001-01M | Center bolt, belt pulley to crankshaft | Stage 1 | Nm | 200 | 200 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA03.30-P-1002-01M | Bolt, starter ring gear/drive plate to crankshaft | Stage 1 | Nm | 20 | 20 |
| Stage 2 | Nm | 45 | 45 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| BA03.30-P-1003-01M | Bolt, flywheel or two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA03.30-P-1004-01M | Bolt, starter ring gear/starter-alternator to crankshaft | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| Stage 3 | ∠° | - | - | ||