LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Crank Assembly - Torque Specifications) >> Torque Specifications >> Flywheel, driven plate, vibration damper, starter ring gear >> Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01D

Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01D

WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 112, 113, 137, 155 

FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR

Number Designation ENGINE 112 ENGINE 113.94/96/97/98
BA03.30-P-1001-01D Center bolt to vibration damper Stage 1 Nm 200 200
Stage 2 ∠° 90 90
BA03.30-P-1002-01D Screw/bolt, two-mass flywheel/drive plate to crankshaft Stage 1 Nm 45 45
Stage 2 ∠° 90 90
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR

Number Designation ENGINE 113.990/991/992/993/995 ENGINE 137
BA03.30-P-1001-01D Center bolt to vibration damper Stage 1 Nm 200 200
Stage 2 ∠° 90 90
BA03.30-P-1002-01D Screw/bolt, two-mass flywheel/drive plate to crankshaft Stage 1 Nm 45 45
Stage 2 ∠° 90 90
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR

Number Designation ENGINE 155
BA03.30-P-1001-01D Center bolt to vibration damper Stage 1 Nm 200
Stage 2 ∠° 90
BA03.30-P-1002-01D Screw/bolt, two-mass flywheel/drive plate to crankshaft Stage 1 Nm 45
Stage 2 ∠° 90