Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01B
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 103, 104, 111
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | ENGINE 103 | ENGINE 104 | |||
|---|---|---|---|---|---|---|
| BA03.30-P-1001-01B | Central bolt of vibration damper | 8.8 | Stage 1 | Nm | - | 200 |
| Stage 2 | ∠° | - | 90 | |||
| BA03.30-P-1002-01B | Bolt of belt pulley/vibration damper | Nm | 25 | 25 | ||
| BA03.30-P-1003-01B | Bolt, retaining lock to oil pan | Nm | - | 10 | ||
| BA03.30-P-1004-01B | Stretch-shank bolt for flywheel to crankshaft | Stage 1 | Nm | 30 | 45 | |
| Stage 2 | ∠° | 90 | 90 | |||
| BA03.30-P-1005-01B | Central bolt of vibration damper | 10.9 | Nm | 300 | 370 | |
| BA03.30-P-1006-01B | Stretch-thread bolt for flywheel to crankshaft | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA03.30-P-1007-01B | Bolt, flywheel or two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | - | 45 | |
| Stage 2 | ∠° | - | 90 | |||
| BA03.30-P-1008-01B | Stretch-shank bolt for two-mass flywheel to crankshaft | Stage 1 | Nm | - | 30 | |
| Stage 2 | ∠° | - | 90 | |||
| BA03.30-P-1009-01B | Stretch-thread bolt for two-mass flywheel to crankshaft | Stage 1 | Nm | - | 45 | |
| Stage 2 | ∠° | - | 90 | |||
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | ENGINE 111 | |||
|---|---|---|---|---|---|
| BA03.30-P-1001-01B | Central bolt of vibration damper | 8.8 | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | |||
| BA03.30-P-1002-01B | Bolt of belt pulley/vibration damper | Nm | 25 | ||
| BA03.30-P-1003-01B | Bolt, retaining lock to oil pan | Nm | 10 | ||
| BA03.30-P-1004-01B | Stretch-shank bolt for flywheel to crankshaft | Stage 1 | Nm | 40 | |
| Stage 2 | ∠° | 90 | |||
| BA03.30-P-1005-01B | Central bolt of vibration damper | 10.9 | Nm | 300 | |
| BA03.30-P-1006-01B | Stretch-thread bolt for flywheel to crankshaft | Stage 1 | Nm | 45 | |
| Stage 2 | ∠° | 90 | |||
| BA03.30-P-1007-01B | Bolt, flywheel or two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | 45 | |
| Stage 2 | ∠° | 90 | |||
| BA03.30-P-1008-01B | Stretch-shank bolt for two-mass flywheel to crankshaft | Stage 1 | Nm | - | |
| Stage 2 | ∠° | - | |||
| BA03.30-P-1009-01B | Stretch-thread bolt for two-mass flywheel to crankshaft | Stage 1 | Nm | - | |
| Stage 2 | ∠° | - | |||