Flywheel, driven plate, vibration damper, starter ring gear - BA03.30-P-1000-01A
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 647
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 601, 602, 603 with/without automatic transmission | Engine 602.981 | Engine 604 with/without automatic transmission | |||
|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | 200 |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| 10.9 | 1st stage | Nm | 320 | - | - | ||
| Step 2 | ∠° | - | - | - | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | 25 | 25 | 25 | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | 10 | - | 10 | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | 35 | 45 | 35 | |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 47 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | 40 | - | - | |
| Step 2 | ∠° | 90 | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 605, 606 with manual transmission (TMF) | Engine 605, 606 with automatic transmission | Engine 611.960/961 | |||
|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | 200 |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| 10.9 | 1st stage | Nm | - | - | 325 | ||
| Step 2 | ∠° | - | - | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | 25 | 25 | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | 10 | 10 | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | 40 | 35 | - | |
| Step 2 | ∠° | 90 | 90 | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 45 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | - | - | |
| Step 2 | ∠° | - | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 611.962 | Engine 611.980 | Engine 611.981/983/987 | Engine 612.961/963/965/966 | |||
|---|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | 200 | 200 |
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| 10.9 | 1st stage | Nm | 325 | 325 | 325 | 325 | ||
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | - | - | - | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | - | - | - | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 45 | 45 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 612.962 | Engine 612.981 | Engine 612.967/990 | Engine 613.960/961 | |||
|---|---|---|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | 200 | 200 | - | 200 |
| Step 2 | ∠° | 90 | 90 | - | 90 | |||
| 10.9 | 1st stage | Nm | 325 | 325 | 325 | 325 | ||
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | - | - | - | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | - | - | - | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | 45 | 45 | 45 | |
| Step 2 | ∠° | 90 | 90 | 90 | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | - | - | - | |
| Step 2 | ∠° | - | - | - | - | |||
FLYWHEEL, DRIVEN PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 647.981 | |||
|---|---|---|---|---|---|
| BA03.30-P-1001-01A | Center bolt of vibration damper | 8.8 | 1st stage | Nm | - |
| Step 2 | ∠° | - | |||
| 10.9 | 1st stage | Nm | 325 | ||
| Step 2 | ∠° | 90 | |||
| BA03.30-P-1002-01A | Bolt of belt pulley/vibration damper to crankshaft | Nm | - | ||
| BA03.30-P-1003-01A | Bolt of retaining lock to oil pan | Nm | - | ||
| BA03.30-P-1004-01A | Stretch shank bolt for flywheel to crankshaft | 1st stage | Nm | - | |
| Step 2 | ∠° | - | |||
| BA03.30-P-1005-01A | Stretch-thread shank bolt for flywheel or two-mass flywheel to crankshaft | 1st stage | Nm | 45 | |
| Step 2 | ∠° | 90 | |||
| BA03.30-P-1006-01A | Stretch shank bolt for two-mass flywheel to crankshaft | 1st stage | Nm | - | |
| Step 2 | ∠° | - | |||