Crankshaft - BA03.20-P-1000-01L
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 159
CRANKSHAFT BEARING CAP
| Number | Designation | ENGINE 159 | |||
|---|---|---|---|---|---|
| BA03.20-P-1001-01L | Crankshaft bearing cap bolt (lower section of cylinder crankcase/main bearing threaded connection) | M9 | Stage 1 | Nm | 20 |
| Stage 2 | Nm | 32 | |||
| Stage 3 | ∠° | 90 | |||
| Stage 4 | ∠° | 90 | |||
| M10 | Stage 1 | Nm | 20 | ||
| Stage 2 | Nm | 40 | |||
| Stage 3 | ∠° | 90 | |||
| Stage 4 | ∠° | 90 | |||
| BA03.20-P-1002-01L | Cylinder crankcase lower section to cylinder crankcase upper section | M6X40 | Stage 1 | Nm | 4 |
| Stage 2 | ∠° | 90 | |||
| M8X25 | Stage 1 | Nm | 10 | ||
| Stage 2 | ∠° | 90 | |||
| M8X50 | Stage 1 | Nm | 10 | ||
| Stage 2 | ∠° | 90 | |||
| M8X65 | Stage 1 | Nm | 10 | ||
| Stage 2 | ∠° | 180 | |||
| BA03.20-P-1003-01L | Bearing pin to crankcase at front for chain drive | Nm | 20 | ||
| BA03.20-P-1004-01L | Axle journal to crankcase at front for chain drive | Nm | 20 | ||
| BA03.20-P-1005-01L | Mount, oil thermostat cap to cylinder crankcase upper section | M6 | Nm | 8, 5 | |
| BA03.20-P-1006-01L | Oil line (oil cooler) with bracket | M8 | Nm | - | |
| BA03.20-P-1007-01L | Knock sensor shield | M8 | Nm | 20 | |
| BA03.20-P-1008-01L | Bolt, oil dipstick guide tube to camshaft adjuster cover | M6 | Nm | - | |