Crankshaft - BA03.20-P-1000-01J

WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 156

MODIFICATION NOTES

14.9.12

Value changed: Cylinder crankcase lower part to cylinder crankcase upper part

CRANKSHAFT BEARING CAP

Number	Designation				ENGINE 156
BA03.20-P-1001-01J	Bolt for crankshaft bearing cap (lower section of cylinder crankcase/main bearing threaded connection)	M9	Stage 1	Nm	20
			Stage 2	Nm	32
			Stage 3	∠°	90
			Stage 4	∠°	90
			Stage 5		losen
			Stage 6	Nm	20
			Stage 7	Nm	32
			Stage 8	∠°	90
			Stage 9	∠°	90
		M10	Stage 1	Nm	20
			Stage 2	Nm	40
			Stage 3	∠°	90
			Stage 4	∠°	90
			Stage 5		losen
			Stage 6	Nm	20
			Stage 7	Nm	40
			Stage 8	∠°	90
			Stage 9	∠°	90
BA03.20-P-1002-01J	Cylinder crankcase lower part to cylinder crankcase upper part	M6	Stage 1	Nm	4
		M6	Stage 2	∠°	90
		M8	Stage 1	Nm	10
		M8	Stage 2	∠°	90
BA03.20-P-1003-01J	Bearing pin to crankcase at front for chain drive			Nm	20
BA03.20-P-1004-01J	Axle journal to crankcase at front for chain drive			Nm	30
BA03.20-P-1005-01J	Attachment of oil thermostat cap to cylinder crankcase upper part	M6		Nm	8, 5
BA03.20-P-1006-01J	Oil line (oil cooler) with bracket	M8		Nm	20
BA03.20-P-1007-01J	Knock sensor shield	M8		Nm	20
BA03.20-P-1008-01J	Bolt, oil dipstick guide tube to camshaft adjuster cover	M6		Nm	8, 5
BA03.20-P-1009-01J	Drain screw for coolant			Nm	15