LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> S400 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Crank Assembly - Torque Specifications) >> Torque Specifications >> Connecting rods >> Connecting rods - BA03.10-P-1000-01D

Connecting rods - BA03.10-P-1000-01D

WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 119 

CONNECTING ROD

Number Designation ENGINE 119
BA03.10-P-1001-01D Connecting rod bolt (stretch-shank bolt) 1st version Initial torque with new screw/bolt Nm 55
with used screw/bolt Nm 45
Tightening angle   ∠° 90
BA03.10-P-1002-01D Connecting rod bolt (stretch shank) 2nd version Initial torque with new screw/bolt Nm 45
with used screw/bolt Nm 40
Tightening angle   ∠° 90
BA03.10-P-1003-01D Connecting rod bolt (stretch shank) 3rd version Initial torque with new screw/bolt Nm 40
with used screw/bolt Nm 30
Tightening angle   ∠° 90
scientia non olet · About LEMON Manuals