111 589 08 43 00 Installation tool - WS03.00-P-0016B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 Mercedes-Benz S65, 2013 Mercedes-Benz S63, 2013 Mercedes-Benz S600, 2013 Mercedes-Benz S550, and 2013 Mercedes-Benz S350. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 111/979, 112, 113, 137, 156, 159, 272, 275, 277, 279, 285, 601/943, 602.91/93/94/96/980/983, 603.91/93/97, 604, 605, 606, 628.962, 629
MODIFICATION NOTES
| 18.8.93 | Replacement for: 601 589 03 43 00 |
| 111 589 08 43 03 Press-in sleeve | FG 03/Set B | WS03.00-P-0016-01B |
Use in FG 03/Set B
Purpose:
Installation tool for pressing in the rear radial shaft sealing ring into the normal position, and into a position offset by 3 mm to the inside with part 3 if the crankshaft is worn.