Risk of explosion caused by handling polyester and epoxy resins. Risk of injury caused by skin and eye contact with polyester and epoxy resins. - AS60.00-Z-0004-01A

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

No smoking! No open flames!

Use protective cream, wear protective gloves and safety glasses. Ensure that the area is well ventilated.

MODEL 199

MODEL 405.100/102/120/122/200/220 with BODY 405.820

MODEL 405.101/103/121/123/201/221 with BODY 405.821

MODEL 956

MODEL 957 with BODY 957.810

Potential risks

Risk of explosion

When processing polyester and epoxy resins with their hardeners, vapors result which are generally combustible.

Keep storage containers closed wherever possible or close immediately after use.

Risk of injury

The vapors from liquid polyester and epoxy resins with hardeners and their mixtures are a health hazard. Direct contact with skin or eyes results in irritation.

Safety instructions/precautions

Always use skin cream, protective gloves and safety glasses.
Ensure that the workstation is well ventilated.
Do not eat or drink at the workstation.

First aid measures

Contact with skin

Thoroughly wash off with soap and water and apply lanolin-based skin cream.

Contact with eyes and mouth

Rinse out immediately with large quantities of water. Contact physician.

Respiratory paths

Move to fresh air. Contact physician.

Fire protection measures

No smoking! No open flames!

Extinguish the source of the fire with large quantities of water.