Wiring diagram for transmission oil auxiliary pump control unit - PE27.19-U-2104-97SAA
| Code: | Designation: | Position: |
|---|---|---|
| CAN C | Drive train CAN | 8K |
| M42 | Electric transmission oil pump | 2A |
| N10/1 | Front SAM control unit with fuse and relay module | 4L |
| N10/1f32 | Fuse 32 | 2K |
| N89 | Transmission oil auxiliary pump control unit | 4A |
| N89 | Transmission oil auxiliary pump control unit | 8A |
| U252 | Valid for ECO start/stop function | 1D |
| U968 | Valid for mild hybrid drive | 1C |
| W15/1 | Ground (right footwell) | 2E |
| X30/21 | Drive train CAN voltage distributor connector | 8L |