Notes on processing glue for metal bushings in fiber composites - AH60.00-P-0030-01SLR
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 199
Processing instructions
- When working with adhesive (A) and hardener (B), always wear protective gloves and eye protection.
- Always observe manufacturer's specifications regarding storage, mixing and processing.
- The adhesive/hardener mixture (C) has a limited processing time. It is therefore absolutely necessary to complete all preparations for gluing before starting to mix the adhesive (A) and hardener (B).
- Always ensure that the supply container for adhesive (A) and hardener (B) are not inadvertently mixed up with the other component with tools or by mixing up lids.
- Always work with adhesive (A) and hardener (B) in well ventilated rooms; use suction or ventilation facilities if required.
For model 199, a specimen of the
Adhesive/hardener mixture (C) must be preserved for recording the repair procedure.