Notes on processing filler for fiber composites with sandwich construction - AH60.00-P-0031-01SLR
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 199
Processing instructions
- When working with filler (A) and hardener (B), always wear protective gloves and eye protection.
- Always observe manufacturer's specifications regarding storage, mixing and processing.
- The filler/hardener mixture (C) has a limited processing time. It is therefore absolutely necessary to complete all preparations for filling before starting to mix the filler (A) and hardener (B).
- Ensure that the supply container for filler (A) and hardener (B) does not have the second component inadvertently added to it through putty or a mixed-up cap.
- Always work with filler (A) and hardener (B) well ventilated rooms; use suction or ventilation facilities if required.