Rear axle differential ring and pinion - BA35.31-P-1000-01C
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 221
REAR AXLE DIFFERENTIAL RING AND PINION
| Number | Designation | MODEL 221 with rear axle center assembly Ø 200 mm | MODEL 221 with rear axle center assembly Ø 215 mm | |
|---|---|---|---|---|
| BA35.31-P-1001-01C | Collar nut, joint flange to drive pinion | Nm | 150 | 150 |
REAR AXLE DIFFERENTIAL RING AND PINION
| Number | Designation | MODEL 221 with rear axle center assembly Ø 187 mm | MODEL 221 with rear axle center assembly Ø 240 mm | |
|---|---|---|---|---|
| BA35.31-P-1001-01C | Collar nut, joint flange to drive pinion | Nm | 150 | 200 |