Abbreviations in the painting sector - AH98.00-P-9409-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 199, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245.2, 246, 251, 292, 463
General abbreviations
- AbfG: Waste Disposal Law
- AbfNachwV: Waste Documentation Ordinance
- AbwAG: Waste Water Charges Act
- ATL: Anodic immersion painting
- ATV: Association for Waste Water Technology
- AVwV: General Administrative Regulation
- Bar Unit for pressure
- BImSchG Federal Immission Control Act
- DD Desmophen-Desmodur (Polyurethane-based two-component paints)
- DIN Deutsche Industrie Norm (German Institute for Standardization)
- DNA: Committee for German Standards
- Elex V Regulations on Electrical Facilities in Potentially Explosive Locations
- EPC Electro Powder Coating (ETL)
- ETL: Electro Dip Coating
- GefStoffV: Dangerous Substances Directive
- GGVS Regulations for Transportation of Hazardous Goods
- GPSG Equipment and Product Safety Act
- GS Hazard Protection
- HS: High Solid
- KH: Artificial resin
- KS: Plastic
- KTL: Cathodic Dip Painting
- MAK: Maximum Workplace Concentration
- MBL: Mercedes-Benz Delivery Instructions
- MS: Medium Solid
- Administrative Offenses Act (OWiG)
- Potential hydrogenium concentration of hydrogen ions in a hydrous solution (pH value)
- Pigment Volume Concentration (PVK)
- RAL: German Institute for Quality Assurance and Certification e. V
- German Noise Act
- German Clean Air Act
- TRbF: Technical Rules for Flammable Liquids
- TRGA Technical rules for hazardous materials
- TrgA Technical rules for hazardous materials
- TRGS: Technical Rules for Hazardous Substances
- USB Chief Environmental Officer
- UWS: Environmental Protection
- Directive on Installations Handling Materials Hazardous To Water (VAwS)
- VbF: Directive on Flammable Liquids
- VDI Association of German Engineers, Dusseldorf
- Directive on the Storage of Liquids Harmful to Ground Water (VLwF)
- WHG: Water Resources Act
- μm 1 micrometer = 1/1000 mm, unit of measurement of coating thickness
- 2K: Two-component
Abbreviations for hazardous materials classes
- A I Flash point under 21 °C
- A II Flash point above 21 °C to 55 °C
- A III Flash point over 55 °C to 100 °C
Abbreviations for plastics
- ABS Acrylonitrile Butadiene Styrene
- AMMA Acrylonitrile Methylmethacrylate
- BFK Boron Fiber Reinforced Plastic
- CA Cellulose Acetate
- CAB Cellulose Acetate Butyrate
- CFK Carbon Reinforced Plastic
- EP Epoxy
- FEP Perfluoroethylene propylene
- GF Glass fiber
- GFK Glass Fiber Reinforced Plastic
- HDPE High Density Polyethylene
- LDPE Low Density Polyethylene
- MF Melamine formaldehyde
- PA Polyamide
- PBTP Polybutylene Terephthalate
- PC Polycarbonate
- PE Polyethylene
- PEC Chlorinated Polyethylene
- PETP Polyethylene Terephthalate
- PF Phenolic formaldehyde
- PIB Polyisobutylene
- PMMA Polymethyl Methacrylate
- POM Polyoxymethylene, Polyformaldehyde (a polyacetate)
- PP Polypropylene
- PP-EPDM Polypropylene ethylene propylene diene copolymer
- PP-PMMA Polypropylene Polymethyl Methacrylate
- PPO Polyphenylene Oxide
- PPS Polyphenylene Sulfide
- PSU Polysulfone
- PS Polystyrene
- PTFE Polytetrafluorethylene
- PUR Polyurethane
- PVC Polyvinyl Chloride
- PVCC Chlorinated Polyvinyl Chloride
- PVDC Polyvinylidene Chloride
- PVF Polyvinylfluoride
- RTPU-GF Reinforced Thermoplastic Polyurethane - glass-fiber reinforced PUR polyurethane
- SAN Styrene Acrylonitrile
- SB Styrene-butadiene
- SI Silicone
- SMS Styrene Alpha Methylstyrene
- UP Unsaturated polyester
- UF Carbamide Formaldehyde
- UP Unsaturated polyester
- VPE Cross Linked Polyethylene