Remove/Install Left Or Right Rear Axle Speed Sensor - AR42.40-P-0820GZ
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 164, 166, 292
Illustration shows model 164
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and keep transmitter key at a location beyond transmitter range (at least 2 m) | ||
| 2 | Lift vehicle on vehicle lift | AR00.60-P-1000GZ | |
| 3 | Detach corresponding complete wheel | Model 164 | |
| AP40.10-P-4050Z | |||
| 4 | Unscrew bolt (3) | *BA42.30-P-1001-02G | |
| 5 | Remove left rear rpm sensor (4) or right rear rpm sensor (5) from wheel carrier | ||
| 6 | Unclip line from brackets (1) | ||
| 7 | Disconnect electrical connector (2) | ||
| 8 | Install in the reverse order |
REAR AXLE RPM SENSOR
| Number | Designation | Model 164.1/8 | Model 166 | |
|---|---|---|---|---|
| BA42.30-P-1001-02G | Self-locking bolt, rpm sensor on rear axle to wheel carrier | Nm | 8 | 8 |
REAR AXLE RPM SENSOR
| Number | Designation | Model 292 | |
|---|---|---|---|
| BA42.30-P-1001-02G | Self-locking bolt, rpm sensor on rear axle to wheel carrier | Nm | 8 |