LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> ML63 >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Brakes - Hydraulic & Mechanical Systems - 166 Chassis - 2 Of 2) >> Testing & Repair >> Remove/Install Electric Parking Brake Switch - AR42.20-P-0505W

Remove/Install Electric Parking Brake Switch - AR42.20-P-0505W

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 156, 166, 172, 176, 242, 246, 292 

Illustrated on model 172 

Fig 1: Electric Parking Brake Switch Component Location
G11974625Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Switch off ignition and keep transmitter key at a location beyond transmitter range (at least 2 m)    
2.1 Unclip cover (1) on left of instrument panel and remove Model 117, 156, 172, 176, 242, 246
SPECIAL TOOL Mounting wedge
Fig 2
2.2 Remove cover below dashboard Model 166, 292 AR68.10-P-1500GQ
3 Disconnect electrical connection (2) from parking brake electrical switch (S76/15)    
4 Release retaining clips (3) and take electric parking brake switch (S76/15) out of instrument panel    
5 Install in the reverse order    
Fig 2: Identifying Mounting Wedge (110 589 03 59 00)
G11974626Courtesy of MERCEDES-BENZ USA