Online SCN Coding - AR54.21-P-0013-01X

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 129.058/063/067/076, 156, 163, 164, 166, 168, 169, 170, 171, 176, 177, 199, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 238, 240, 242, 245, 246, 251, 253, 257, 292, 450, 452, 454, 461, 636, 639, 906

MODEL 463

up to model year 2013

The following work instructions describe the online SCN coding procedure using XENTRY flash.

Requirements for online SCN coding:

Networked diagnostic system
User ID and password for XENTRY flash (user on Aftersales Platform)

Entrance into coding in Xentry Diagnostics (XD)

Select control unit.
Select coding in XENTRY Diagnostics.
Control unit adaptations or commissioning → SCN coding → Online (networked Star Diagnosis unit)
Enter user ID and password into login screen and continue with "Login".
After logging in the SCN coding data are automatically queried in the background and the control unit is then coded.
Print out order log and enclose repair order.

The order log can also be stored on the diagnostic system using "Print menu" → "Print as file". The Starpad program enables order logs to be displayed and printed out using "Star utilities" → "Logs".