Read out map data status from COMAND navigation system - AP82.85-P-8251C
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 169, 203, 209, 211, 219, 245
| Preparatory tasks | |||
| 1 | Switch on COMAND controller unit and remove all CDs or DVDs | ||
| 2 | Enable data storage media slot | With CODE 512 (COMAND APS incl. DVD changer) | |
| Check | |||
| 3 | Insert master-DVD 1 | ||
| 4 | Note displayed map data versions on service sheet | With map data release that is not up to date: ↓ Check whether a map data update is available to the customer free of charge. Initial registration was max. 3 years ago. If so: ↓ Subject to a separate repair order, update the map data free of charge. * Map update ↓ |
|
| Service Information: Free map updates for COMAND MODEL 169, 245Up to 3 years as of initial registration date If no: ↓ Check with the customer whether map data should be updated subject to a charge. If so: ↓ Subject to separate repair order, update the map data. |
SI82.85-P-0019A | ||
| Restore input condition | |||
| 5 | Remove master DVD 1 | ||
| 6 | Insert previously removed CDs or DVDs and switch off COMAND controller unit |