Remove/install cover below instrument panel (right) - AR68.10-P-1520GQ

MODEL 166 

Fig 1: Identifying Cover Below Instrument Panel (Right) Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition and remove transmitter key from electronic ignition lock control unit	On vehicles with code (889) Keyless Go: Press keyless go start/stop button repeatedly until ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).
2	Remove bolt (3)
3	Lower cover (1)
4	Disconnect electrical connectors (4)
5	Remove cover (1)	Ensure that air ducting (2) is seated correctly.
6	Install in the reverse order