Overview of wiring diagrams for electrical system, equipment and instruments - PE54.00-P-1100NAA
MODEL 166 up to model year 2016
| Wiring diagram control unit DC/AC converter | MODEL 166 up to model year 2016 with CODE U80 (115 V socket in load compartment) Control unit N24/3 |
PE54.10-P-2103NAA |
| Rear fuse and relay box wiring diagram | MODEL 166 up to model year 2016Specification 1 |
PE54.15-P-2103NAA |
| MODEL 166 up to model year 2016 without CODE Z04 (B4 armoring for special protection version) without CODE Z05 (B5 armoring on special protection version) without CODE Z22 (Panic alarm system) Specification 2 |
PE54.15-P-2103NAB | |
| MODEL 166 up to model year 2016Specification 3 |
PE54.15-P-2103NAC | |
| MODEL 166 up to model year 2016 with CODE Z04 (B4 armoring for special protection version) with CODE Z05 (B5 armoring on special protection version) with CODE Z22 (Panic alarm system) Specification 4 |
PE54.15-P-2103NAD | |
| Wiring diagram of engine compartment fuse and relay box | MODEL 166 up to model year 2016F58, Specification 1 |
PE54.15-P-2106NAA |
| MODEL 166 up to model year 2016F58, Specification 2 |
PE54.15-P-2106NAB | |
| Wiring diagram for battery compartment prefuse box (F33) | MODEL 166 up to model year 2016 without CODE Z04 (B4 armoring for special protection version) without CODE Z05 (B5 armoring on special protection version) without CODE Z22 (Panic alarm system) Specification 1 |
PE54.15-P-2508NAA |
| MODEL 166 up to model year 2016 without CODE Z04 (B4 armoring for special protection version) without CODE Z05 (B5 armoring on special protection version) without CODE Z22 (Panic alarm system) Specification 2 |
PE54.15-P-2508NAB | |
| MODEL 166 up to model year 2016 without CODE Z04 (B4 armoring for special protection version) without CODE Z05 (B5 armoring on special protection version) without CODE Z22 (Panic alarm system) Specification 3 |
PE54.15-P-2508NAC | |
| MODEL 166 up to model year 2016 with CODE Z04 (B4 armoring for special protection version) with CODE Z05 (B5 armoring on special protection version) with CODE Z22 (Panic alarm system) |
PE54.15-P-2508NAD | |
| Wiring diagram, engine compartment prefuse box (F32/3) | MODEL 166 up to model year 2016 |
PE54.15-P-2513NAA |
| Wiring diagram, interior prefuse box (F32/4) | MODEL 166 up to model year 2016 |
PE54.15-P-2514NAA |
| Wiring diagram for cockpit fuse box | MODEL 166 up to model year 2016Fuse box F3/2, F3/3 |
PE54.15-P-2911NAA |
| Connector separation point wiring diagram | MODEL 166 up to model year 2016X18 (1), part 1 |
PE54.18-P-2300NAA |
| MODEL 166 up to model year 2016X18(1) part 2, X18(2), X26(1), X26/4(1) |
PE54.18-P-2300NAB | |
| MODEL 166 up to model year 2016X22/2(1, 2) |
PE54.18-P-2300NAC | |
| MODEL 166 up to model year 2016X25/2 (1), part 1 |
PE54.18-P-2300NAD | |
| MODEL 166 up to model year 2016X25/2(1) part 2, X25/2(2), X26/31(1) |
PE54.18-P-2300NAE | |
| MODEL 166 up to model year 2016X29/6 (1, 2, 4) |
PE54.18-P-2300NAF | |
| MODEL 166 up to model year 2016X26 (3, 4, 5, 8), X35/1(1) |
PE54.18-P-2300NAG | |
| MODEL 166 up to model year 2016X35/3 (1), X35/4 (1) |
PE54.18-P-2300NAH | |
| MODEL 166 up to model year 2016X18/3 (1) X174/1 (1), X174/4 (1) |
PE54.18-P-2300NAI | |
| Wiring diagram for electronic ignition switch (EIS) control unit | MODEL 166 up to model year 2016Control unit N73 |
PE54.21-P-2104NAA |
| Wiring diagram, special vehicle multifunction control unit (SVMCU (MSS)) | MODEL 166 up to model year 2016 with CODE Z04 (B4 armoring for special protection version) with CODE Z05 (B5 armoring on special protection version) with CODE Z22 (Panic alarm system) Control unit N26/14 |
PE54.21-P-2105NAA |
| Wiring diagram for overhead control panel (OCP) control unit | MODEL 166 up to model year 2016Control unit N70 |
PE54.21-P-2107NAA |
| Wiring diagram rear control unit | MODEL 166 up to model year 2016Control unit N10/8, Specification 1 |
PE54.21-P-2110NAA |
| MODEL 166.0 up to model year 2016 with CODE 847 (3rd seat row) Control unit N10/8, Specification 2MODEL 166.8 up to model year 2016Control unit N10/8, Specification 2 |
PE54.21-P-2110NAB | |
| Wiring diagram for offroad control panel control unit | MODEL 166 with TRANSMISSION 722.9 up to model year 2016 with CODE 430 (ON& OFFROAD package) with CODE 489 (AIRMATIC (air suspension with level adjustment and adaptive damping system (ADS))) Control unit N72/3 |
PE54.21-P-2117NAA |
| Wiring diagram for upper control panel and lower control panel control unit | MODEL 166 up to model year 2016Control unit N72, N72/1 |
PE54.21-P-2118NAA |
| Wiring diagram for rear control panel control unit | MODEL 166 up to model year 2016 with CODE 581 (Comfort automatic air conditioning) with CODE 872 (Electrically heated left and right rear seats) Control unit N72/2 |
PE54.21-P-2125NAA |
| Wiring diagram for signal acquisition and actuation module (SAM) control unit | MODEL 166 up to model year 2016Control unit N10, Specification 1 |
PE54.21-P-2127NAA |
| MODEL 166 up to model year 2016Control unit N10, Specification 2 |
PE54.21-P-2127NAB | |
| MODEL 166 up to model year 2016Control unit N10, Specification 3 |
PE54.21-P-2127NAC | |
| Wiring diagram for multifunction camera | MODEL 166 up to model year 2016 with CODE 238 (Active lane keeping Assist) with CODE 476 (Lane keeping assist) with CODE 513 (Road sign recognition system) with CODE 608 (Adaptive Highbeam Assist) Control unit A40/11 |
PE54.21-P-2129NAA |
| Wiring diagram for data link connector/diagnostic socket | MODEL 166 up to model year 2016Diagnostic socket X11/4 |
PE54.22-P-2000NAA |
| Wiring diagram for instrument cluster (IC) control unit | MODEL 166 up to model year 2016Control unit A1 |
PE54.30-P-2101NAA |
| Wiring diagram tachograph | MODEL 166 up to model year 2016 with CODE 930 (Pre-installation for tachograph) Control unit N154 |
PE54.61-P-2100NAA |
| Wiring diagram for Parktronic system (PTS) control unit | MODEL 166 up to model year 2016 with CODE 220 (PARKTRONIC) with CODE 235 (Active Parking Assist) Control unit N62 |
PE54.65-P-2101NAA |
| Wiring diagram of reversing camera | MODEL 166 up to model year 2016 with CODE 218 (Rear view camera) without CODE 498 (Japanese version) Reversing camera B84/3 |
PE54.65-P-2103NAA |
| MODEL 166 up to model year 2016 with CODE 218 (Rear view camera) with CODE 498 (Japanese version) Control unit N93/3, reversing camera B84/3 |
PE54.65-P-2103NAB | |
| Blind Spot Assist wiring diagram | MODEL 166 up to model year 2016 with CODE 234 (Blind Spot Monitoring) B29/4, B29/5 |
PE54.71-P-2100NAA |