Attach engine hoist - AR33.10-P-0105CW

MODEL 204, 207 

Fig 1: Attaching Engine Hoist - Shown On Model 204 With Engine 271

Courtesy of MERCEDES-BENZ USA

Shown on model 204 with engine 271 

Fig 2: Attaching Engine Hoist - Shown On Model 204 With Engine 642

Courtesy of MERCEDES-BENZ USA

Shown on model 204 with engine 642 

	Install
1.1	Remove upper engine cover	MODEL 204 with ENGINE 271, 642, 651 MODEL 204 with ENGINE 646.8 MODEL 207 with ENGINE 271, 642, 651 MODEL 204 with ENGINE 271, 642, 651	AR01.20-P-5014-02CD
		MODEL 207 with ENGINE 271, 642, 651 MODEL 204 with ENGINE 646.8 ENGINE 271, 642 Pull off engine cover upwards. Ignition switched off.	AR01.20-P-5014-02A
1.2	Detach front engine cover	MODEL 204 with ENGINE 156, 272, 276 MODEL 207 with ENGINE 272, 273, 276, 278
1.3	Remove boot between upper charge air duct and air filter housing and detach charge air duct from cylinder head cover	MODEL 207 with ENGINE 278
2	Preinstall adaptations for engine hoist on engine hoist	MODEL 204, 207 with ENGINE 642, 651 Two adaptations are to be used when the transmission is removed.
		Adaptation of engine lifting device	Fig 4
3	Mount preassembled engine lifting device (01) on strut towers and longitudinal member	Operate carefully in the area of the longitudinal members. Otherwise, hoses and lines can be crushed. Position the engine hoist (01) carefully. Otherwise, the surfaces in the area of the suspension strut tower may get scratched, cracked or notched. The support of the engine hoist (01) must  be mounted so the firmly seated spacer sleeve (arrow) points outwards. Observe the manufacturer's assembly specifications and safety information.
		Engine lifting device	Fig 3
4	Mount front lifting eye on engine	MODEL 207 with ENGINE 278	AR33.10-P-0105-01SX
			*BA01.30-P-1006-01X
		MODEL 207 with ENGINE 278
		Lifting eye	Fig 5
5	Adjust engine lifting device (01) and tighten bolted connection
6	Mount shackle (2) on the engine suspension lug (1)
7	Pretension lifting device (3); to do so tighten the clamping screw (4)	Where several lifting device are used they must be uniformly aligned.
8	Remove in the reverse order

Fig 3: Identifying Engine Lifting Device (240 589 00 61 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Adaptation Of Engine Lifting Device (642 589 00 61 00)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Lifting Eye (278 589 00 40 00)

Courtesy of MERCEDES-BENZ USA