Press rubber mount with grooved ball bearing onto linkage arm - AR41.10-P-0100-05TX

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 172, 204, 207, 212, 218, 219, 231

Fig 1: Identifying Drift (126 589 03 15 00)

Courtesy of MERCEDES-BENZ USA

Press rubber mount with grooved ball bearing (7) using drift (05) onto joint fork of rear drive shaft.
The open side of the grooved ball bearing (7) must face downwards.

Fig 2: Pressing Rubber Mount With Grooved Ball Bearing
Courtesy of MERCEDES-BENZ USA