Retrofit additional fan for COMAND - AN82.85-P-0005CW
MODEL 204.0## (except 204.077) 1# up to 2/28/11, 204.2## (except 204.277) 1# up to 2/28/11 up to model year 2011 with CODE 510 (Audio 20 with CD changer) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.0## (except 204.077) 1# up to 2/28/11, 204.2## (except 204.277) 1# up to 2/28/11 up to model year 2011 with CODE 511 (Audio 50 APS with DVD changer) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.0## (except 204.077) 1# up to 2/28/11, 204.2## (except 204.277) 1# up to 2/28/11 up to model year 2011 with CODE 523 (MB Audio 20 radio) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.0## (except 204.077) 1# up to 2/28/11, 204.2## (except 204.277) 1# up to 2/28/11 up to model year 2011 with CODE 525 (MB Audio 50 APS radio) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.9## 1# up to 7/30/12 up to model year 2012 with CODE 510 (Audio 20 with CD changer) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.9## 1# up to 7/30/12 up to model year 2012 with CODE 511 (Audio 50 APS with DVD changer) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.9## 1# up to 7/30/12 up to model year 2012 with CODE 523 (MB Audio 20 radio) without CODE 494 (US version) without CODE 498 (Japanese version)
MODEL 204.9## 1# up to 7/30/12 up to model year 2012 with CODE 525 (MB Audio 50 APS radio) without CODE 494 (US version) without CODE 498 (Japanese version)
Shown on model 204.0
Shown with CODE 275 (Memory package (driver seat, steering column, mirrors))
| Remove | |||
| 1 | Remove audio equipment | ||
| AR82.60-P-7502CW | |||
| 2 | Remove instrument cluster cover (13) | ||
| MODEL 204.0/2 | AR54.30-P-6015CW | ||
| MODEL 204.9 | AR54.30-P-6015CY | ||
| 3 | Unclip steering column sleeve (14) from instrument panel (12) at both ends (arrows B) and pull over steering column tube module control unit (N80) | ||
| 4 | Remove cover (5) | ||
| 5 | Remove brake pedal cover (6) | ||
| 6 | Disconnect electrical connector (8) from steering column raise/lower adjustment motor (M20/2) | MODEL 204 with CODE 275 (Memory package (driver seat, steering column, mirrors)) | |
| 7 | Remove screws/bolts (7) and remove steering column raise/lower adjustment motor (M20/2) | MODEL 204 with CODE 275 (Memory package (driver seat, steering column, mirrors)) | |
| Install | |||
| 8 | Guide air exhaust duct (3) through opening in area of instrument cluster cover (13) and clip into slot of removed audio equipment at side | ||
| 9 | Slide air exhaust duct (4) into air exhaust duct (3) | ||
| 10 | Position COMAND fan motor (M4/13) at air conditioner housing (A32) | ||
| 11 | Tighten screws/bolts (10, 11) | Rechargeable screwdriver, rechargeable drill |
|
| 12 | Connect radio fan electrical connector (X120) | ||
| 13 | Loosely position air exhaust duct (2) in instrument panel (12) | ||
| 14 | Install air intake duct (1) at COMAND fan motor (M4/13) | ||
| 15 | Insert steering column raise/lower adjustment motor (M20/2) and tighten screws/bolts (7) | MODEL 204 with CODE 275 (Memory package (driver seat, steering column, mirrors)) | |
| 16 | Connect electrical connector (8) to steering column raise/lower adjustment motor (M20/2) | MODEL 204 with CODE 275 (Memory package (driver seat, steering column, mirrors)) | |
| 17 | Insert air exhaust duct (2) into connection (arrow A) of air exhaust duct (3) | ||
| 18 | Clip steering column sleeve (14) into instrument panel (12) (arrows B) | ||
| 19 | Install instrument cluster cover (13) | ||
| MODEL 204.0/2 | AR54.30-P-6015CW | ||
| MODEL 204.9 | AR54.30-P-6015CY | ||
| 20 | Tighten bolt (9) | ||
| 21 | Install brake pedal cover (6) | ||
| 22 | Install cover (5) | ||
| 23 | Install audio equipment | ||
| AR82.60-P-7502CW |